Mark 2600 is famous, and you can't underestimate this either. The power is modest compared to the 2600, but I also like the clear, powerful sound and rugged design. There are dents on the exterior and upper right grill, and a feeling of use can be seen such as dullness, small scratches, etc. (Kobayashi Hitoshi)
Maintenance information: 2024.5.14 Operation confirmed
Accessories: none
Main specifications: 100W+100W (4Ω to 8Ω) W481 x H142 x D246mm 10 kg
Headshell compatible with EMT tonearms. Why don't you install your favorite cartridge and enjoy it (Murakoshi Yoichi)
Maintenance information: 2024.5.10 sound output confirmed
Accessories: none
Main specifications: dead weight 9g
Accuphase's core preamp. It inherits the design technology of the higher-level model C-2800 and is equipped with AAVA volume control. You can enjoy high transparency and pure sound with fine particles typical of Accuphase. Exterior, small scratches on the INPUT selector dial, scratches on the left corner of the front window, small scratches on the remote control, dullness, and a feeling of use can be seen (Kobayashi Hitoshi)
Maintenance information: 2024.5.5 operation confirmed
Accessories: remote control, instruction manual, power cord, connection cord, original box
Main specifications: 7 line preamp input systems (RCA x 5, XLR x 2), 3 output systems (XLR x 1, RCA x 2) W465 x H150 x D405 mm 16.2 kg
Phono cable 1.2m 5pin-RCA high-purity 6NCU hybrid core wire 7-layer double 2-core shield structure, high quality cable that strongly shuts out induced noise. Comparing various cables as a standard for phono cables is also fun. The degree is generally good (Murakoshi Yoichi)
Maintenance information: 2024.5.16 continuity confirmed
Accessories: original box
This is a phono equalizer amplifier using FET. Excluding local feedback, the overall CR type circuit configuration is compatible, and MM/MC switching is handled by first-stage FET gain switching. The sound is neutral and unobtrusive. The appearance is fine, with no noticeable scratches, etc. (Kobayashi Hitoshi)
Maintenance information: 2024.5.14 Operation confirmed
Accessories: power cable
Main Specifications: Input Terminal Unbalance (RCA) 1 System Output Terminal Unbalance (RCA) 1 System mm3mV MC0.25mV W102 x H112 x D209 mm 1.0 kg
XLR cable 3ch line selector High quality parts are used for the changeover switch, connector, and internal wiring, and the original sound quality is conveyed as it is. You can select up to 3 amplifiers (pre-amplifier or pre-main amplifier) for 1 source device. Also, you can select up to 3 source devices to be switched for 1 amplifier (preamp or premain amplifier). You can see a feeling of use, such as appearance, dullness, abrasions, etc. (Kobayashi Hitoshi)
Maintenance information: 2024.5.14 continuity confirmed
Accessories: none
Main specifications: 1 input/3 output systems GND common to all input/output W250 x H64 x D117 mm 2.3 kg
※The dust cover is missing. Maintained! Sony's first fully automatic player. Equipped with a biotracer that electronically controls all complex movements of the tone arm. An ambitious Japanese work packed with every gadget imaginable at the time! Needle pressure can be adjusted simply by controlling the knob on the front panel, and the applied needle pressure value is digitally displayed. You can see the exterior, dullness, and feeling of use (Kobayashi Hitoshi)
Maintenance information: 2024.2.27 Maintained (main unit internal inspection grease coating, cleaning) *At low temperatures, an offset will occur when the arm is forcibly fed by manual operation. The current situation is that stable operation is not possible unless the room temperature or the temperature inside the main unit rises to a certain extent (room temperature).
Accessories: none
Main specifications: Crystal Rock D.D. Fully automatic player system, needle pressure adjustment range 0.5 g to 3.0 g, W500 x H175 x D430 mm, approx. 15 kg
Denon network player. Starting with streaming services and internet radios, you can play back a variety of sound sources, such as music servers (NAS/PC/Mac, etc.) on a local network, sound sources stored on USB memory devices, smartphones, tablets, and Bluetooth devices. Serial BBG36200101300 (Murakoshi Yoichi)
Maintenance information: 2024.5.16 sound output confirmed
Accessories: remote control, instruction manual, power cord
Main specifications: digital audio input terminal, USB-A input x 1, analog audio output terminal... balanced output x 2, headphone output x 1, digital audio output terminal, optical digital output x 1, others/NETWORK x 1, Wi-Fi/Bluetooth antenna terminal x 2, IR control output x 1 W434 x H107 x D312 mm 3.9 kg
A stabilized power supply that improves sound quality by supplying a stable power source with very little noise to USB devices in place of PC bus power. It plays a part in upgrading the USB data you have (Murakoshi Yoichi)
Maintenance information: 2024.5.11 sound output confirmed
Accessories: AC adapter
Main specifications: AC100V output voltage DC5V maximum current 500mA input terminal Neutrik USB B type connector output terminal high quality USB cable approx. 10 cm+B type plug W97 x H31 x D39 mm
The price has been reduced. 2024/5/15 sales price 198,000 yen A D/A converter representing WADIA. The thick, damping sound quality unique to WADIA in its heyday is attractive. The dynamic sound quality, which combines a sense of extrusion and volume in the mid and low frequencies, is still deeply popular with jazz and rock fans. You can see a feeling of use such as appearance, dullness, small scratches, etc. (Kobayashi Hitoshi)
Maintenance information: 2024.5.14 Operation confirmed
Accessories: remote control, spike holder
Main specifications: 32 times resampling direct D/A conversion method input terminal 1 coaxial system (BNC) 3 optical systems (ST x 2, TOS x 1) XLR (AES/EBU) 1 system input sampling frequency 32 kHz/44.1 kHz/48 kHz automatic switching W350 x H92 x D407 mm 9 kg
The disposal price has been reduced. Member discounts are not applicable. 2024/5/12 sales price 129,800 yen Sony 1TB HDD built-in audio player. It reproduces not only high-resolution sound sources such as DSD 5.6 MHz and 192 kHz/24 bits, but also compressed sound sources with high sound quality. If you install the software on your PC or smartphone, you can transfer and operate music data to the HDD. You can also enjoy CDs and MP3s ripped at home with high sound quality. The appearance is good with little feeling of use (Kobayashi Hitoshi)
Maintenance information: 2024.5.10 Operation confirmed
Accessories: remote control, instruction manual (simplified version), power cord, connection cord, original box
Main specifications: High-resolution sound source compatible internal HDD (1TB) playback compatible codec DSDIFF [DSD] /2.8 MHz/5.6 MHz) DSDIFF [DST] DSF/2.8 MHz/5.6 MHz) WAV/maximum 192 Hz/32 bit) AIFF/192 Hz/24 bit) FLAC/192 Hz/24 bit) ALAC/192 Hz/24 bit) WMA · MP3 · AAC · ATRAC (Non DRM) playback frequency Characteristics 2 Hz to 80 kHz audio output (XLR/RCA) EXT terminal (USB type A) W430 x H130 x D390 mm 14.5 kg
The disposal price has been reduced. Member discounts are not applicable. 2024/5/12 AccuPhase CD player with sales price 148,000 yen. It is a CD player developed by introducing technology cultivated with separate systems, DP-80L/DC-81L. You can hear a sound with clear outlines and high transparency, just like the Accuphase from the 90s. Appearance, dullness, small scratches, and a feeling of use can be seen (Kobayashi Hitoshi)
Maintenance information: 2024.5.8 operation confirmed
Accessories: remote control, copy of manual
Main specifications: 18-bit DAC, 2 analog outputs, 2 balanced outputs, 2 digital output systems, W475 x H115 x D325 mm, 14.5 kg
In January 2023, both the interior and exterior were maintained and brushed up! ORIGINAL LANSALOY EDGE! The OLYMPUS S8R representing JBL has arrived. The 075 tweeter is full of realism, with the sound of a driver blowing fire into the thick, dry low frequencies, and a sense of realism that leaves graininess. You can enjoy the real thrill of vintage audio. Outside of the exterior, the back plate on one side is missing, and the finish is beautiful due to maintenance (Kobayashi Hitoshi)
Maintenance information: 2023.1.10 maintenance (exterior repair, polishing, baffle/hakama repair before and after oil finishing, painting, lattice repair, polishing, painting, lining replacement. Woofer maintenance (edge softening treatment, corn paper coating, passive corn paper coating). Driver maintenance (magnetic circuit rust removal/gap cleaning/center adjustment, sound-absorbing material replacement, terminal contact cleaning). Tweeter maintenance (horn disassembly/polishing, magnetic circuit rust removal/gap cleaning, terminal contact cleaning). Network maintenance (LX5: terminal rust removal, acid washing, insulation bush & mounting screw replacement. ATT (SW type) disassembly contact polishing and cleaning. Reinforced with silicone to prevent the coil from coming off A frequency characteristic measurement check (~ 42 kHz) was performed, and the original capacitor was continuously used because the results were good. Check the input/output waveform and balance, and check the sound output. N7000 terminal rust removal, acid cleaning, insulation bush, and mounting screw replacement. ATT replacement with a brand new one. A frequency characteristic measurement check (~ 42 kHz) was performed, and the original capacitor was continuously used because the results were good. Check input/output waveform and balance, check sound output))
Accessories: saran net, diffuser, instruction manual
Main specifications: 3-way 3-speaker passive radiator system low range unit 38cm cone type (LE15A) mid range unit horn type (375) high range unit (075) passive radiator 38cm cone type (PR15) network LX5/N7000 sound pressure level 95dB allowable input 125W dimensions W1020 x H670 x D510 mm weight 82 kg
The price has been reduced. 2024/4/14 sales price 79,800 yen LE8T's ancestral 20cm cone type full range unit that makes the most of the basic design of the D130 in a small caliber. It's small and has a cute appearance, but the bright, clear, and tense sounds make you feel like JBL from the good times. In addition to leaving small repair marks on the exterior and part of the cone, there is a feeling of use such as dullness, sticking marks, etc. (Kobayashi Hitoshi)
Maintenance information: 2024.4.11 Maintained (cone repair)
Accessories: none
Main specifications: 20cm cone type full range unit, allowable input 30W, 8Ω, 97dB (1kHz), recommended enclosure, internal volume: 42L to 113L, depth: 76mm, weight: 2.3 kg
The price has been reduced. 2024/4/27 sales price 79,800 yen This is a 3-way center speaker with the tuning that best matches the 500, 300, and 100 of the company's Silver series. Since the C350 was designed to pursue only performance without considering size restrictions, the dynamism in terms of sound quality is impressive. The appearance is good with little feeling of use (Kobayashi Hitoshi)
Maintenance information: 2024.4.26 Operation confirmed
Accessories: saran net, jumper (general purpose) original box
Main specifications: 3-way sealed frequency characteristics 40Hz-35,000Hz crossover frequency 830Hz/3,200Hz allowable input 200W recommended amplifier output 80-200W W560×H235×D240mm 14.9kg
It's early plastic shell, but the interior has been replaced with a new one. The rich, rich SPU-like sound is attractive. The built-in transformer gives the impression that transparency and clarity have been improved. The exterior is broken into the plastic cover, and there is a feeling of use such as dullness. Serial 624056 (Murakoshi Yoichi)
Maintenance information: 2024.5.8 sound output confirmed
Accessories: original box
Main specifications: MC type with built-in transformer, output 10 mV, needle pressure 3 to 4.5 g, dead weight 32 g
*Since there is no manufacturer, it will be sold as is. Clean regulator with low noise power supply function for CSE notebook PCs and peripheral units. It supplies high quality power in place of the AC power adapter included with the laptop. These solve noise problems etc. caused by the included AC adapter, and you can enjoy high-quality sound playback with PC audio. You can see a feeling of use, such as appearance, dullness, abrasions, small scratches, etc. (Kobayashi Hitoshi)
Maintenance information: 2024.5.11 Operation confirmed
Accessories: power cord, connection cord, plug adapter
Main specifications: PSE standard product W221 x H145 x D413 mm weight 11 kg
※Since there is no manufacturer, it will be handed over as is. CSE isolation regulator. AC is converted to DC, stored in a capacitor, and then the sine wave is amplified analogically. It is a low impedance constant voltage power supply suitable for load devices with high power consumption. The rated output is 500W, and the output frequency can be changed to 50, 60, 80, 100, and 120 Hz, and it also has a soft start function to reduce through lines and inrush current, so it seems useful. The exterior, paint deterioration, dullness, small scratches, etc. can be seen (Kobayashi Hitoshi)
Maintenance information: 2024.5.10 continuity confirmed
Accessories: original box
Main specifications: outlet with 3P ground x 2 W328 x H176 x D433 mm 18 kg
※Since there is no manufacturer, it will be handed over as is. PSE standard product. Once the AC power source is converted to DC, a new 60 Hz sine wave is created using the built-in transmitter to generate a clean power source. The output power is 100W. Recommended for use with low power devices such as preamps, CD players, analog players, etc. Comes with an earth polarity switching function. You can see a feeling of use, such as appearance, dullness, abrasions, etc. (Kobayashi Hitoshi)
Maintenance information: 2024.5.11 Operation confirmed
Accessories: original box
Main specifications: output power 100W output frequency 60Hz dimensions W221 x H145 x D415 mm weight 12 kg
Early red axis model! Mono cartridge OFD25 initial type for EMT arms. The sound quality is clear and tight, and it has a strong thickness unique to mono. While it has a characteristic European luster that can be seen at every end of the sound quality, it reproduces the sound of the source without coloring. *Since it is mono, the output is Rch only, so please use the amplifier's mono switch. The cantilever is slightly to the left (Murakoshi Yoichi)
Maintenance information: 2024.5.5 sound output confirmed
Main specifications: MC type needle tip diameter 25 μm diamond needle impedance 37 Ω (right output) needle pressure 5 g output voltage 1.15 mV frequency characteristics 30 Hz to 15 kHz tracking angle 90 degrees dead weight 33 g
Maintained in February 2024! JBL's highest peak Alnico woofer 150-4C The individual, which can be said to be the finest, is now in stock. The non-corrugation fixed edge and tightly attached cone paper are highly efficient and have excellent bursting in the low frequencies. The exterior has a feeling of use over time (Kobayashi Hitoshi)
Maintenance information: 2024.2.27 Maintained (cleaning, corn paper coating, edge repair/dumping agent application, gasket deposit removal)
Accessories: none
Main specifications: 38cm cone type woofer impedance 16 ohms crossover 500 Hz maximum output 30 W
Comes with casters A large audio board with excellent robustness and vibration damping. Particleboard material It is suitable for placing speakers and large power amplifiers. The appearance is fine, with no noticeable scratches, etc. (Kobayashi Hitoshi)
Accessories: none
Main specifications: total load capacity 100 kg W590 x H105 x D550 mm 6.5 kg
*We were able to confirm the simple sound output, but since it is cheap, it is currently sold. A 2.1 channel (wireless subwoofer) system developed to match the company's Bravia X9000F series. The S-Force PRO front surround mechanism virtually creates a three-dimensional stereoscopic sound image without installing a rear speaker. The exterior is good, with a slight dullness (Kobayashi Hitoshi)
Maintenance information: 2024.5.13 Operation confirmed (video, remote control, simple BT sound)
Accessories: remote control, instruction manual, power cord, connection cord
Main specifications: 2.1 ch maximum power output 300W front 100W/100W subwoofer 100W size: bar speaker W930 x H58 x D85 mm 2.5 kg subwoofer W190 x H382 x D387 mm 7.8 kg
Comes with side wood. A masterpiece model of a CD player that reproduces the soft, powerful sound of analog. The thick mid-range and rich analog-like sound quality is a unique appeal. It is a high degree of perfection that can be said to be one of the goals in terms of sound quality among CD players of all time. The exterior is fine with no noticeable scratches over time, and it is only dull (Kobayashi Hitoshi)
Maintenance information: 2017.2.17 Maintained (spindle motor lubrication, height adjustment, all capacitors replaced. Replace the memory backup battery with a super capacity. Tact switch contact cleaning for operation. (Inspection of each operation)
Accessories: instruction manual, power cord
Main specifications: CDM3 mechanism, multi-bit PHILIPS TDA1541D/A converter, 3 analog output systems (XLR x 1, RCA x 2 (fixed/variable)), 1 digital output (AES), 1 clock input/output system (BNC), W320 x H131 x D355 mm, 6 kg
XLR cable 5.0 m male to female details unknown. The appearance is good with little feeling of use (Kobayashi Hitoshi)
Maintenance information: 2024.5.9 continuity confirmed
Accessories: none
Comes with casters A large audio board with excellent robustness and vibration damping. Particleboard material It is suitable for placing speakers and large power amplifiers. The appearance is fine, with no noticeable scratches, etc. (Kobayashi Hitoshi)
Accessories: none
Main specifications: total load capacity 100 kg W590 x H105 x D550 mm 6.5 kg
Inexpensive because there are many line scratches. The die-cast aluminum shell has no screws, has a heavy weight, is sturdy, and the design is stylish and creative. Rigidity is high and low frequency tightness can be expected (Murakoshi Yoichi)
Maintenance information: 2024.5.8 continuity confirmed
Accessories: none
Main specifications: Die-cast aluminum, self-weight 10.6 g
2M series RED. The good sound and fluttering energy typical of an orthophone are attractive. The degree is generally good (Kanai Hidetsugu)
Maintenance information: 2024.4.25 sound output confirmed
Accessories: needle cover
Main specifications: MM type 5.5 mV 20 to 22,000 Hz 47 ohms suitable needle pressure 1.8 g dead weight 7.2 g
The price has been reduced. This model uses a non-feedback amplifier circuit using discrete components at a 2024/5/5 sales price of 59,800 yen at the entire stage. High quality parts such as metal film resistors and high quality film capacitors are used in the RIAA circuit. The delicate expressiveness with a smooth, high level of SN typical of recent models is attractive. You can see a feeling of use such as appearance, dullness, small scratches, etc. (Kobayashi Hitoshi)
Maintenance information: 2024.5.4 operation confirmed
Accessories: power cable
Main specifications: mm/MC compatible non-feedback equalizer amplifier input sensitivity mm2.5mV/47kΩ or less, MC0.12mV/470Ω W220 x H57 x D228 mm 2.6 kg